People like to do-it-themselves. Often, they do not know everything they should about installing an air conditioner. This problem often leads to some AC installation mistakes. Of course, these mistakes are the ones that should be avoided if you want your air conditioner to run right.
Fortunately for AC installation Miami has enough experts to help the do-it-yourselfer avoid those mistakes. They know all about those mistakes and have learned how to install air conditioning units correctly
But just in case you do not turn to an expert AC installation Miami offers here are some mistakes to avoid.
5 Installation Mistakes
#1. Wrong sizes and connections
This is a common mistake many DIY people make. They think they remember the fittings and sizes correctly but when they get back to the air conditioner, nothing fits. They either forgot a measurement or they measured it wrong. It happens.
To avoid this mistake, you can measure twice and write the measurements down. Or you can remember that the diameter measure depends on the length of suction pipe used. It is the little details that can turn an easy job into a big headache.
#2. Wrong equipment
This issue arises when you are trying to mix and match old and new parts. The problem is that a lot of new air conditioner parts are not interchangeable or compatible with older parts.
You want to save money by reusing older parts but that does not always work. Partly because the specifications of the older part do not work with the specifications of the newer air conditioner.
This attempt to save and reuse ends up with the air conditioner underperforming and not cooling like it should.
#3. Airflow issues
If you have installed your new air conditioner and turned it on. You may wonder why it is not cooling like it should or there are other problems. These issues tend to turn up when the installer does not get the air flow correct.
The correct amount of airflow depends on the number of tons the unit is cooling. For example, 1 ton of cooling needs roughly 400 cubic feet per minute of airflow. This has to be set up before you charge the air conditioner with its coolant.
Sound complicated? That is why you hire an expert on AC installation Miami offers.
#4. Improper drainage
These little things happen all the time. Someone forgets to double check or the installation looks right but the AC is not working right. This may be the result of one of the common installation mistakes that take place. The evaporator coil is not draining because someone forgot to install the P trap.
The P trap is essential for the evaporator to drain properly. For AC installation Miami experts know this issue and double check. They also know that a secondary drain pan is required to protect your home. That is if you are installing one above an unconditioned room of your house.
#5. An improper electrical hook up
This is an important mistake to avoid. Most DIY is not always knowledgeable in electrical wiring. The air conditioner needs to be properly grounded, hooked up to the right power source (usually 240 volts), and use the correct wire gauge.
If you do not do these things, then your air conditioner will not work. You may also have other electrical issues as well. Ne other things to make sure your air conditioner runs right, you need to install the correct size of a breaker. You cannot go larger than what is specified, and you certainly cannot go smaller.
Some Final Thoughts
Avoiding these mistakes will make sure your air conditioner runs right. Your house will be cooled properly. But people do make mistakes. The best way to solve the mistakes is to not get angry. Just go and see what it the problem and hire an expert AC installation Miami has an abundance of them.
When it comes to installing your air conditioner it is always wise to have the experts do it. It may cost you a little more for the installation, but it will save you in the long run. You won’t have to keep correcting installation errors.
